|
|
 |
 |
|
ABSOLUTE Digimatic Indicator ID-C Series 543-Specially Designed for Bore Gage Application
Series 543
|
 |
|
|
FEATURES:
This ID-C Series Digimatic Indicators are exclusively designed for ID measurement.
The minimum value holding function provides the easy of detection of hole diameter.
An analog bar indicator is integrated to enhance the intuition in reading.
GO/±NG judgment is performed by setting the upper and lower tolerances.
Up to three sets of master value and upper/lower tolerance value can be memorized.
Employing the ABSOLUTE linear encoder, the Signal ID-C always displays the spindle "Absolute Position" from the origin at power-on.
Technical Data
Accuracy: Refer to the list of specifications.
Resolution: 0.001mm or .00005”/0.001mm
Display: LCD
Length standard: ABSOLUTE electrostatic capacitance type linear encoder
Max. response speed: Unlimited
Measuring force: 1.5N or less
Battery: SR44 (2 pcs.), 938882
Battery life: Approx. 2000 hours under normal use
Dust/Water protection level: IP42
Function
Origin-set/Preset, Zeroset, GO/±NG judgment,Power ON/OFF, Data output,inch/mm
conversion (on inch/metric models only)
Alarm: Low voltage, Counting value composition error, Over-flow error, Tolerance limit setting error
Optional Accessories
905338: SPC cable (40” / 1m)
905409: SPC cable (80” / 2m)
Applicable Gages Series 511 and 526
|
|
|
|
|